ROCKIT APPLIANCES REPAIR · IN-HOME SERVICE
Stove Burner Won't Ignite
Most gas burner problems are caused by moisture, food spills or a misaligned burner cap. If cleaning and drying do not help, the igniter, spark module or switch may need replacement.
Safe checks before scheduling service
A symptom by itself does not identify the failed part. These simple checks may solve the problem or help you describe what is happening.
- Make sure the burner cap is seated correctly on the burner head.
- Clean and fully dry the burner head and cap, especially after a boil-over or cleaning.
- Check whether the other burners click and light; if none click, the spark module or power may be the problem.
Common causes
These are the causes we find most often. Only an in-home diagnosis can confirm which one applies to your appliance.
Wet or dirty burner
Food or water in the burner ports or around the electrode stops the spark from lighting the gas.
Misaligned burner cap
A cap that is not seated correctly causes weak or uneven flames and poor ignition.
Cracked igniter electrode
A cracked porcelain electrode can spark to the wrong place or not spark at all.
Spark module failure
If no burners click, or they click weakly, the spark module that powers all the igniters may have failed.
Spark switch problem
A burner that clicks constantly, even when turned off, usually has moisture in or a failed spark switch.
Important safety note
If you smell gas, turn off the burners, do not use any switches or flames, leave the area and call PG&E or 911.
Stove & Oven Repair near me
Rockit diagnoses and repairs this problem at your home in San Mateo and across our service area from San Francisco to Sunnyvale. The $45 diagnostic/service call is waived if you approve the repair. Have the brand, model number and any error code ready when you call.
Transparent estimates before repair
$45 diagnostic/service call — waived when you approve the repair. Online estimated labor is $160–$220; parts are not included and are quoted separately if needed. Actual repair costs depend on the diagnosis.
Frequently asked questions
Why does my burner keep clicking after it lights?
Constant clicking usually means moisture in the burner or switch, or a failed spark switch. Let the burner dry; if the clicking continues, the switch may need replacement.
Can I light a gas burner with a match?
Many gas cooktops can be lit by hand during a power outage. Check your manual for safe instructions before trying.
What is your diagnostic fee?
The diagnostic/service call is $45 and is waived when you approve the repair.
Does the online estimate include parts?
No. The $160–$220 range is an initial labor estimate only. Replacement parts, if required, are quoted separately before the repair.
