ROCKIT APPLIANCES REPAIR · IN-HOME SERVICE
Dishwasher Won't Start
When a dishwasher will not start, the cause is often simple, such as a control lock or a door that is not fully latched, but it can also be a failed latch switch, thermal fuse or control board.
Safe checks before scheduling service
A symptom by itself does not identify the failed part. These simple checks may solve the problem or help you describe what is happening.
- Make sure the door is fully closed and latched.
- Check whether a control lock or child lock is on, or whether a delay-start timer is set.
- Check the breaker, any switch on the wall that controls the dishwasher, and the outlet under the sink if it plugs in.
Common causes
These are the causes we find most often. Only an in-home diagnosis can confirm which one applies to your appliance.
Door latch or door switch
If the latch switch does not close, the control will not start a cycle as a safety measure.
Control lock or settings
Control lock, delay start or a cycle that was paused can all look like a dishwasher that will not start.
No power to the dishwasher
A tripped breaker, a wall switch turned off, or a loose connection at the junction box can cut power.
Thermal fuse
Some dishwashers have a thermal fuse on the control board that cuts power when it blows.
Control board or touchpad failure
Failed buttons or a faulty control board can stop the dishwasher from responding.
Important safety note
Turn off the breaker before removing any panels or checking electrical connections.
Dishwasher Repair near me
Rockit diagnoses and repairs this problem at your home in San Mateo and across our service area from San Francisco to Sunnyvale. The $45 diagnostic/service call is waived if you approve the repair. Have the brand, model number and any error code ready when you call.
Transparent estimates before repair
$45 diagnostic/service call — waived when you approve the repair. Online estimated labor is $160–$220; parts are not included and are quoted separately if needed. Actual repair costs depend on the diagnosis.
Frequently asked questions
The lights come on but the dishwasher will not run. What does that mean?
Power is reaching the control, so the cause is more likely the door latch, a control lock, a failed touchpad or the control board.
How do I turn off the control lock?
On most dishwashers you press and hold the lock button for a few seconds. Check your manual for your model.
What is your diagnostic fee?
The diagnostic/service call is $45 and is waived when you approve the repair.
Does the online estimate include parts?
No. The $160–$220 range is an initial labor estimate only. Replacement parts, if required, are quoted separately before the repair.
